Evonik TEGO Wet 280 substrate wetting and anti-crater additive

Products Description

TEGO Wet 280 substrate wetting and anti-crater additive, Spray applications containing co-solvent formulations have good compatibility and good atomization

Utility

Substrate wetting, anti-crater effect, flow improvement, low foam

Suitable Sex

Project	Typical data
Water-based	Suitable
Solvent-based	Generally suitable
Two-liquid type 100%	Not applicable
Radiation Curing	Not applicable
Transparent paint	Suitable
Pigmented	Suitable

from Dry (transparent) paint

Project	Typical data
Primer/Primer	Suitable
Top coat	Suitable

Solubility

Project	Typical data
Water	Clear and soluble
Ethanol	Clear and soluble
Tripropylene glycol diacrylate (TPGDA)	Clear and soluble
Butyl acetate	Clear and soluble
Petroleum solvent	Insoluble

Suggestions Adding amount

Calculated based on the original formula based on the total amount: 0.1-1.0%

Use Description

Can be added as original or pre-diluted

It is recommended to add it to the second half

Recipe Suggestions

Substrate wetting alternative: TEGO Wet 240

Chemistry Structure

Polyethersiloxane copolymer

Technology Parameters

Project	Typical data
Appearance	Clear liquid
Active ingredients	100%

Contact Suitability of food

Auxiliaries/monomers/solvents are listed in the Swiss Ordinance Schedule 817.023.21 A and Table B, Appendix 6

Save Security

When stored in original unopened packaging, between -40 and +40℃ , the storage period of this product is at least 24 months from the date of manufacture.

round-color:#ffffff; width:50.0000%”>

Project

Typical data

Appearance

Clear liquid

Active ingredients

100%

Contact Suitability of food

Auxiliaries/monomers/solvents are listed in the Swiss Ordinance Schedule 817.023.21 A and Table B, Appendix 6

Save Security

When stored in original unopened packaging, between -40 and +40℃ , the storage period of this product is at least 24 months from the date of manufacture.