CAS 83016-70-0

Overview:

Chinese name: N,N,N’-trimethyl-N’-hydroxyethyl bisaminoethyl ether, trimethylhydroxyethyl bisaminoethyl ether

Alias: trimethylhydroxyethyl bisaminoethyl ether, CAS 83016-70-0, trimethylhydroxyethyl bisaminoethyl ether, Jeffcat ZF-10, high efficiency reactive foaming catalyst, reactive foaming catalyst

English name: N,N,N’-trimethyl-N’-hydroxyethyl-bisaminoethylether

Molecular formula: C9H22N2O2

Relative molecular mass: 191.2

CAS number: 83016-70-0

Trimethylhydroxyethyl bisaminoethyl ether Trimethylhydroxyethyl bisaminoethyl ether CAS 83016-70-0 Trimethylhydroxyethyl bisaminoethyl ether Jeffcat ZF-10 High efficiency reactive foaming catalyst Reaction Type foaming catalyst

trimethylhydroxyethyl bisaminoethyl ether

Physical and chemical properties:

Trimethylhydroxyethyl diaminoethyl ether is a colorless or light yellow liquid, soluble in water.

Relative density (25℃): 0.95

Viscosity (25℃): 12mPa.s

Hydroxyl value: 295mgKOH/g

Flash point (PMCC): 118℃

application:

Trimethylhydroxyethyl bisaminoethyl ether contains hydroxyl groups and is a high-efficiency reactive foaming catalyst with low emission. It is used for polyether polyurethane flexible foam, molded foam, and hard foam for packaging. The hydroxyethyl bisaminoethyl ether can be used to replace the traditional catalyst bis(dimethylaminoethyl) ether in an equal amount to reduce VOC emissions in the system.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

package:

200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Store in a cool, dry place, keep the container sealed and avoid contact with oxides. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated place. All storage containers must be well sealed to avoid contact with water or other influential substances, because this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are not suitable and should be avoided as much as possible.