Evonik TEGO Foamex 1488 defoamer emulsion
Products Description
TEGO Foamex 1488 has very strong defoaming and anti-foaming properties, general application
Application Suggestions
|
Brush application/roller application |
4 |
|
Airless spray |
3 |
|
Compressed air spray |
4 |
|
Letterpress/gravure printing |
5 |
|
Dip coating, flow coating, shower coating |
5 |
|
Floor bed |
3 |
Note: 0=not applicable 5=highly applicable
Suitable Sex
|
Project |
Typical data |
|
Water-based |
Suitable |
|
Solvent-based |
Not applicable |
|
Two-liquid type 100% |
Not applicable |
|
Radiation Curing |
Not applicable |
|
Transparent paint |
Suitable |
|
Pigmented |
Suitable |
Add At
|
Grinding section |
Generally suitable |
|
Second half |
Suitable |
Suggestions Adding amount
Calculated based on the original product and the total formula: 0.1-1.0%
Use Description
Mix briefly with low shear before use
Can be added to the grinding section or the lower half
It is recommended to add the original product
The long-term effectiveness of defoaming agents is formulation dependent and should be tested in individual formulations (Recommended at different temperatures)
Recipe Suggestions
Stronger alternatives: TEGO Foamax 855, TEGO Foamax 1495, better compatibility Capacitive alternatives: TEGO Foamax 823, TEGO Foamax 825
Dilution
Can be diluted with water
The storage stability after dilution will be limited
May not be diluted with organic solvents due to stability
Chemistry Structure
Polyethersiloxane copolymer emulsion with oxygen phase silica
Technology Parameters
|
Project |
Typical data |
|
Appearance |
White thixotropic liquid |
|
Solid content |
Ca.24% |
|
Solvent |
Water |
Contact Suitability of food
Auxiliaries/monomers/solvents are listed in the Swiss Ordinance Schedule 817.023.21 A, Attachment 6
TEGO Foamax 1488 is listed in BfR Recommendation XIV
Detailed 10/2011 status information is available upon request
Can be used in compliance with FDA regulations 21 CFR 175.105
Save Security
When stored in original unopened packaging between +4 and +40°C , the storage period of this product is at least 12 months from the date of manufacture.
Packaging
30kg plastic drum, 210kg plastic drum, 1000kg container
le=”background-color:#f1c40f”> Technical parameters
|
Project |
Typical data |
|
Appearance |
White thixotropic liquid |
|
Solid content |
Ca.24% |
|
Solvent |
Water |
Contact Suitability of food
Auxiliaries/monomers/solvents are listed in the Swiss Ordinance Schedule 817.023.21 A, Attachment 6
TEGO Foamax 1488 is listed in BfR Recommendation XIV
Detailed 10/2011 status information is available upon request
Can be used in compliance with FDA regulations 21 CFR 175.105
Save Security
When stored in original unopened packaging between +4 and +40°C , the storage period of this product is at least 12 months from the date of manufacture.
Packaging
30kg plastic drum, 210kg plastic drum, 1000kg container