Hotline
Application

Covestro Desmophen C1200 linear polycarbonate diol 2000 molecular weight liquid

Type

Linear aliphatic polycarbonate polyester

Supply form

Solvent-free medium viscosity liquid

Purpose

Used as a base for advanced flexible coatings and sealing primers

Product Specifications                                                                                   

Features

Value

Measurement units

Method

HazenColor value

≤200

DIN EN 1557

acid value

≤0.1

Equivalent

about1,000

Flashpoint

about224

°C

DIN EN ISO 2719

Density@20

About1.10

g/ml

DIN EN ISO 2811-2

*The above values ​​are general information and are not part of product specifications.

Solubility/Dilution            
Generally, it has good miscibility with the following solvents, but the storage stability of the prepared solution must be tested.
Desmophen® C1200 can be diluted with esters, ketones, aromatic hydrocarbons and ether ester solvents. Solutions with low base content will cause turbidity and sedimentation after long-term storage.
Urethane grade solvents should be used (water content <0.05%, no other active impurities).

Compatibility
Desmophen® C1200 can be mixed with many Desmophen® and Desmodur® products. Considering the wide variety of miscible products, products should be tested for compatibility before use.

Application                                                        
Coatings and sealing primers prepared with Desmophen ® C1200 and aliphatic isocyanates have good weathering and hydrolysis resistance. Other uses include decorative coatings, sealants and sealants.

Save
Desmophen C1200 is easily hygroscopic and should be stored sealed in the original container. This product has a shelf life of at least 6 months when stored in the original container under appropriate conditions.
Storage at low temperatures may form crystalline precipitates. The crystallized material can be melted by slow heating at a temperature not exceeding 60°C.

Safety: Hazard Identification
According to relevant standards (Council Directive 67/548/EEC or 199/45/EC), this product is not classified as dangerous goods.
The Safety Data Sheet (953249) should be read carefully. It includes information on labeling, transportation and storage, as well as information on product use, product safety and ecology.

Crystalline precipitates may form. The crystallized material can be melted by slow heating at a temperature not exceeding 60°C.

Safety: Hazard Identification
According to relevant standards (Council Directive 67/548/EEC or 199/45/EC), this product is not classified as dangerous goods.
The Safety Data Sheet (953249) should be read carefully. It includes information on labeling, transportation and storage, as well as information on product use, product safety and ecology.

Prev:
Next: